The LUMiNODE SDM-DIG module is designed for two-way powerline communication of luminaires with a two-way bus driver compatible with IEC62386 interface (known as DALI) and the control unit over the powerline. The module acts as converter between the QM-50-SSI3 and IEC62386 Interface (DALI) protocols.

• Two-way Powerline Communication QM-50-SSI3
• Compatible with IEC62386 Interface (DALI)
• Lighting control in real time
• Autonomous lighting control
• Optional - Setting the control intensity levels according to DIN input switching
• Can control up to 2 drivers with IEC62386 interface (known as DALI)

Parameter:
Input voltage: AC 220V - 240V; 50 Hz
Operating temperature: -40 °C to +75 °C
Consumption: 0,5 W
Protection class: II.
Output: 2-way IEC62386 Interface
Weight: 95 g
IP rating: IP20
Dimensions (LxWxH): 123x70x16,5 mm

LUMiNODE SDM-110 module changes your LED luminaire into a smart, dimmable and power-line-controllable luminaire. It should be applied in smart lighting management system with motion detection for luminaires with 0-10 V analogue input. The LUMiNODE SDM-110 listens on input 230 V powerline for commands from SEAK modulator. It gets assigned an ID and supports full range of dimming commands (individual, group, and broadcast level), partnight dimming schedule programming for standalone operation and CLO function. It has no circuits for sending a reply.

• One-way powerline communication QM-50-SSI3
• Setting the control intensity levels according to DIN input switching
• Regulation from 0 to 100%
• Can control multiple* 0-10V (at least 2)

Parameter:
Input voltage: AC 220V - 240V; 50 Hz
Operating temperature: -20 °C to +75 °C
Consumption: 0,5 W
Communication interface: 1-way powerline QM-50-SSI3
IP rating: IP20/IP65
Weight: 90 g

The LUMiNODE SDM-110DA module is designed for two-way communication of luminaires with drivers compatible with IEC62386 interface (known as DALI) or drivers with 0 – 10V (1-10V) control input. The LUMiNODE SDM-110DA listens on input 230V powerline for commands from SEAK modulator. It gets assigned an ID and supports full range of dimming commands (individual, group and broadcast level), partnight dimming schedule programming for standalone operation and CLO function.

• Two-way powerline communication QM-50-SSI3
• Setting the control intensity levels according to DIN input switching
• Regulation from 0 to 100%
• Can control up to 2 drivers with IEC 62386 interface (known as DALI)
• All control outputs are galvanically isolated from the input 230V

Parameter:
Input voltage: AC 220V - 240V; 50 Hz
Operating temperature: -20 °C to +75 °C
Consumption: 0,5 W
Communication interface: 2-way powerline QM-50-SSI3
IP rating: IP20/IP65
Weight: 90g/200g

LUMiNODE SDM-110DA-HV-IP module is designed for two-way communication of luminaires with a two-way IEC62386 (DALI) bus driver or PWM output and the control unit over the powerline for high voltage environments.

• Two-way Powerline Communication QM-50-SSI3
• Lighting control in real time
• Autonomous lighting control
• Ability to mass upload a new schedule in groups
• Both output buses are galvanically isolated from the input

Parameter:
Input voltage: AC 220V - 240V; 50 Hz
Operating temperature: -20 °C to +75 °C
Consumption: 0,5 W
Protection class: II.
Output: 2-way IEC62386 interface (DALI), PWM (from an external source 15V - DPU1)
IP rating: IP20
Weight: 90g
Dimensions (LxWxH):123x70x16,5 mm

LUMiNODE SSR-1000 module is used for for remote switching of up to 1000 W line. Luminode SSR-1000 switches the relay based on commands it receives over power line. It listens to commands on phase L and switches the phase Lx. The Lx can be connected to L (if you want to switch the same phase on which we are communicating) but you may also switch different phase.

• One-way powerline communication QM-50-SSI3

Parameter:
Input voltage: AC 220V - 240V; 50 Hz
Operating temperature: -30 °C to +75 °C
Consumption: 0,5 W
Communication interface: 1-way powerline QM-50-SSI3
IP rating: IP65
Weight: 90g

Luminode SSR-500 switches the relay based on commands it receives over power line. It can also detect lamp error based on specified measured tolerance of selected parameters (current, power factor, ...). Luminode SSR-500 listens to commands on phase L and switches the phase Lx. The Lx can be connected to L (if you want to switch the same phase that is used for communication), but you may also switch other phases (Luminodes are galvanically isolated).

• Two-way powerline communication QM-50-SSI3
• Allows not only turn on / off of lamp, but also detect lamp error
• One module for multiple lamps, while the maximum switched power on Lxout does not exceed 500 W

Parameter:
Input voltage: AC 220V - 240V; 50 Hz
Operating temperature: -30 °C to +50 °C
Consumption: 0,5 W
Communication interface: 2-way powerline QM-50-SSI3
IP rating: IP65
Weight: 90g
Weight: 220 g

The LUMiNODE NEMA7 module is designed for two-way powerline communication of luminaires with a two-way DALI bus driver and the control unit over the powerline. The module acts as converter between the QM-50-SSI3 and DALI protocols.

• Two-way Powerline Communication QM-50-SSI3
• Compatible with DALI
• Lighting control in real time
• Autonomous lighting control

Parameter:
Input voltage: AC 220-240 V; 50 Hz
Operating temperature: -30 °C to +75°C
Consumption: 0,5 W
Protection class: II.
Output: 2-way DALI
IP rating: IP66
Weight: 180g
Dimensions (LxWxH): 98x77 mm

The LUMiNODE SDM-DIG-C allows you to control a DT8 driver compatible with IEC62386 interface (known as DALI) over powerline. It supports color control (RGB) as well as tunable white. Full color scene controls is available.

• Two-way Powerline Communication QM-50-SSI3
• Control color temperature and RGB scenes
• Up to 15 color scenes can be predefined
• Ability to mass upload a new schedule in groups

Parameter:
Input voltage: AC 220V - 240V; 50 Hz
Operating temperature: -40 °C to +75°C
Consumption: 0,5 W
Protection class: II.
Output: 2-way IEC62386 Interface
IP rating: IP20
Weight: 196g
Dimensions (LxWxH): 123x70x16,5 mm

LUMiCOM is a device designed to provide transparent communication with 3rd party IoT devices and sensors via existing power line. SEAK power line protocol QM-50-SSI3 is used and thus is compatible with other members of SEAK LUMi family.

• Data converter for power line
• Two-way powerline communication QM-50-SSI3

Parameter:
Input voltage: AC 220V - 240V; 50 Hz
Operating temperature: -20 °C to +50°C
Consumption: 0,5 W
Communication interface: UART 5V TTL, RS232
IP rating: IP20/IP65
Weight: 110g

DIM BAR® SDM-110 is versatile, adaptable, yet low cost and easy to use dimming module designed for electrical energy savings in the indoor and outdoor lighting applications, offering low investment demands and quick payback. Thanks to its small size, DIM BAR® is capable to be placed inside basically any luminaire equipped with an LED driver.

• Compatible with 0 - 10 V dimming input
• Powerline Communication
• Programmable dimming sequence
• Interior and exterior use
• Compatible with most LED drivers

Parameter:
Input voltage: AC 220 V ~ 240 V; 50 Hz
Operating temperature: -40 °C to +75 °C
Consumption: 0,25 W
Max. operating altitude: 2500 m a.s.l.
Output: 0-10 V
Max. wire size: 0,5 mm solid
Power factor: 0.99 / AC 230 V
Weight: 37 g
IP rating: IP54
Dimensions (LxWxH): 110x33x6 mm

DIM BAR® SDL-AN1 is versatile, adaptable, yet low cost and easy to use dimming module designed for electrical energy savings in the indoor and outdoor lighting applications, offering low investment demands and quick payback. It is designed to dimming through the IEC62386 (DALI) interface.

• One-way powerline communication QM-50-SSI1
• Compatible with IEC62386 (DALI) interface
• Programmable dimming sequence
• Interior and exterior use
• Compatible with most LED drivers

Parameter:
Input voltage: 220-240 VAC; 50 Hz
Operating temperature: -40 °C to +75 °C
Consumption: 0,28W
Max. wire size: 0,5 mm solid
Output: IEC62386 (DALI) interface dimmable
Weight: 40g
IP rating: IP54
Dimensions (LxWxH): 72x34x6 mm

DIM BAR® SDM-W10 is versatile, adaptable, yet low cost and easy to use dimming module designed for electrical energy savings in the indoor and outdoor lighting applications, offering low investment demands and quick payback. Thanks to its small size, DIM BAR® is capable to be placed inside basically any luminaire equipped with an LED driver.

• Compatible with PWM dimming input
• Powerline Communication
• Programmable dimming sequence
• Interior and exterior use
• Compatible with most LED drivers

Parameter:
Input voltage: 220-240 VAC; 50 Hz
Operating temperature: -40 °C to +75 °C
Consumption: 0,7 W
Max. operating altitude: 2500 m a.s.l.
Output: PWM
Max. wire size: 0,5 mm solid
Power factor: 0.99 / AC 230V
Weight: 20g
IP rating: IP54
Dimensions (LxWxH): 70x33x7mm